With the continuous development and improvement of industrial technology in our country, many enterprises have begun to attach importance to production efficiency and low-cost production linesCentralized feeding systemAs it also matured,Central centralized feeding systemNot only does it have a high degree of automation, but it also has a small footprint, low energy consumption, and is very stable during use, reducing costs for enterprises and improving production efficiency.Central centralized feeding systemMake the production workshop cleaner and easier to manage.

        The centralized feeding system adopts a sealed circuit design with one machine and one pipe, ensuring stable operation of the entire system without any plastic moisture or material blockage. It is used in conjunction with a central drying machine (dehumidifier) system to allow dry air to re dry the raw materials, preventing the plastic from moisture regain after drying. At the same time, the conveying pipe is cleaned after each conveying cycle to ensure that there is no residual material inside the pipe. While avoiding the moisture regain of raw materials, it also ensures the consistency of the raw materials added to the injection molding machine. Under the action of vacuum negative pressure, the original dust in the raw materials is filtered out through the filter (dust collector) system, which is beneficial for improving product quality.

1. Due to the continuous improvement of injection molding workshop technology, the quality requirements for required materials are also increasing. The application of a central feeding system can greatly improve product quality, greatly enhance production efficiency, reduce defect rates, and lower production costs for enterprises.

2. The pipelines of the central feeding system do not occupy ground space, and the routing and placement are aesthetically pleasing, saving a lot of effective space for enterprises and effectively improving the environment of the production workshop.

3. Many workshops require the use of a combination of multi-color materials, and in this case, a central feeding system is needed to adjust different raw materials according to needs, achieving unmanned feeding operations throughout the factory and saving a lot of manpower for the enterprise. This can save the enterprise a lot of trouble in material replacement.

4. Traditional feeding equipment has a slow feeding efficiency and cannot meet the requirements for material use in workshop production. The central feeding system adopts microcomputer centralized automatic control to achieve 24-hour continuous feeding operation of granular materials. It can ensure the requirement for diversified main materials, and work safely and reliably with high feeding efficiency.

5. The use of a central feeding system ensures consistent performance of the raw materials added to the injection molding machine while avoiding moisture regain. Under the action of vacuum negative pressure, the original dust in the raw materials will be filtered out through the dust filtration system, which helps to improve the quality of the formed products.

     ThereforeCentralized feeding systemIt can save labor and raw material costs, have a long service life, keep the factory environment clean and pollution-free, maintain the corporate image, and win more customers.Shandong Juheng Environmental Protection Equipment Co., LtdWe have been deeply involved in this industry for many years and have rich experience in pneumatic conveying. If you have any needs in this area, please feel free to design your own centralized feeding system with our experts for free.