The installation of pneumatic conveying systems is a complex and critical process that requires attention to multiple aspects to ensure the stability and efficiency of the system. Here are some main installation precautions:

1、 Equipment installation

Unpacking inspection and storage: After unpacking all equipment or materials, relevant information should be properly stored and handed over to the purchaser together after installation is completed. At the same time, it is necessary to check whether there are any components inside the equipment

Sediments and other debris, as well as the presence of moisture in the fluidized bed.

Installation location and fixation: The equipment should be installed on a sturdy foundation and ensure its stability. For equipment that requires special fixation, such as material sealing pumps, it should be ensured that their fixation method complies with

Meet the design requirements.

Electrical wiring and debugging: When installing electrical equipment, ensure that the wiring is correct and secure, and perform necessary debugging work to ensure the normal operation of the equipment.

2、 Installation of conveying pipelines

Drawings and Construction: All pipeline installations should be carried out according to the drawings, and any adjustments must be consulted with the design personnel in advance. At the same time, the airtightness of all pipelines should be ensured to avoid leakage

Qi phenomenon.

Valve installation: The installation position of the valve should be easy for personnel to operate and maintain, and efforts should be made to avoid subjecting the valve to external loads. For valves with special requirements, such as frequent need

The installation height of the operated valve should be moderate to facilitate personnel operation.

Pipeline connection and sealing: The connection of pipelines should be firm and have good sealing to avoid air leakage and deformation. For places that require high-altitude operations, such as the installation of ash conveying pipes, ash silos, etc

Ensure that safety measures for the work platform are in place, such as setting up guardrails, ladders, etc.

3、 Installation of ash storage equipment

Equipment selection and installation: The selection of ash storage equipment should meet the design requirements and ensure its stability and durability. During the installation process, it is important to ensure that the equipment is securely fixed and connected,

Avoid malfunctions during operation.

Safety measures: During the installation of ash storage equipment, the principle of safety first should always be adhered to, and necessary safety measures should be taken. If clear warning signs are set up and relevant measures are taken

Safety training and guidance, etc.

4、 Other precautions

Cleaning and blowing: Before installation, all air pipelines, steel pipes, elbows, and other debris such as mud and sand should be removed. Before installing the valve of the intake device, the air pipeline should be purged to ensure that

It is clean.

Expansion joint installation: The installation of expansion joints must ensure the expansion and contraction capacity to adapt to the thermal expansion and contraction of pipelines during operation.

Avoid interference: When the gray pipe encounters other pipes such as air pipes in the direction of passage, it should be avoided to avoid mutual interference.

Training and guidance: During the installation process, necessary training and guidance should be provided to the staff to ensure they are familiar with the installation process and operating procedures.

In summary, the installation of pneumatic conveying systems requires attention to multiple aspects, including equipment installation, conveying pipeline installation, ash storage equipment installation, and other precautions. pass

Strictly following installation specifications and operating procedures can ensure the stability and efficiency of the system, and improve the reliability and economy of material transportation.