With the continuous development of pneumatic conveying systems, many enterprises have begun to choosePneumatic conveying systemThis not only brings higher production efficiency to enterprises, but also reduces production costs and makes the production scene clean and tidy. However, when choosing a pneumatic conveying system, you may encounter confusion on how to choose that type of pneumatic conveying system. Here, we will explain itDense phase pneumatic conveyingDoes the application scenario meet your production standards.

        Dense phase conveying is generally suitable for conveying materials that are difficult to transport, abrasive, or brittle. Dense phase pneumatic conveying is the process of pushing materials forward along a pipeline at a relatively slow speed in the form of plugs or full pipes. This means that materials have minimal wear on pipelines and elbows, long pipeline life, low system maintenance, and a higher solid to gas ratio can also reduce power consumption and operating costs. The main components of dense phase transportation areash pumpThat is, what we often refer to as a dense phase pump. Roots blower or screw air compressor serves as the air source device for the bin pump, providing continuous air supply and pressurization to the bin pump. After reaching a certain pressure, the gas is released, mixed with the material, and transported at high speed along the pipeline to the receiving point.The dense phase pneumatic conveying system can transport materials from one or more aggregate points to one or more receiving points, and can transport various types of powder materials, such as powders, particles, mixtures, and other loose solid materials. The starting speed of general dense phase pneumatic conveying is usually less than 10m/s, and the solid gas ratio is greater than 10:1. A typical dense phase conveying system is shown in the following figure: