Roots blowerAfter years of use, the probability of failure will increase significantly compared to before. If the maintenance and repair of Roots blower are done well, the service life of the blower will be greatly improved, and new equipment will be purchasedInstallation, maintenance, and overhaul work can not only prevent problems before they occur, but also keep the fan in better operating condition and extend the service life of the equipment.

1、 Regarding the installation of Roots blower:

1. Do not install Roots blowers in places where personnel are frequently active to avoid injury caused by high temperatures and collisions.

In summer, fans should avoid high temperatures, which can reduce their lifespan, and water-cooled Roots fans can also be chosen. Choose engine oil with high fluidity, which can save energy. If it is winter, it is recommended to chooseOil with low fluidity.

3. Please do not install the fan in places containing organic solvents, flammable gases, and corrosive gases to prevent fires or poisoning. Double oil tank three blade Roots blower.

2、 Regarding the daily maintenance of Roots blower

Before starting the Roots blower, it is necessary to check the oil level and quality of the mailbox to avoid shortages and poor oil quality.

2. Regular and timely cleaning and cleaning should be carried out according to the on-site environment where the fan is used, such as dust, dust, and equipment usage frequency.

3. The new Roots blower needs to change the gear oil after one month of operation, and then change the oil after three months. This way, the oil change cycle can be selected based on the quality of the oil, but should not exceed six months.

4. After running the new machine for 24 hours, adjust the tension of the V-belt once and then adjust it again after a week. In the future, pay attention to observing the V-belt regularly. When abnormal noise or high current is found in the fan, it is necessary to check the belt tension in a timely mannerDegree.

3、 Regarding the maintenance of Roots blower

When maintaining and inspecting the Roots blower, the power must be cut off before proceeding.

2. Non professionals are advised not to disassemble, dismantle, repair, or modify the fan without authorization. If the equipment malfunctions, please immediately shut it down to investigate the cause and contact the manufacturer or dealer for professional maintenance personnel to conduct the inspectionRepair.

Shandong Juheng Environmental Protection Equipment Co., LtdWe are a manufacturer of pneumatic conveying equipment. If you need equipment such as fans, feeders, bin pumps, dust collectors, material sealing pumps, branch valves, etc., please feel free to contact us. We provide free on-site design solutions, free machine testing, one-year warranty, and lifelong maintenance services.