The occurrence of pipe blockage during the pneumatic conveying process of white carbon black is a problem that requires rapid response. Here are some emergency measures:

1、 Immediately stop the machine for inspection

• shutdownOnce a blockage is detected, the pneumatic conveying system should be immediately stopped to prevent further damage to the equipment or exacerbation of the blockage.

• checkConduct a comprehensive inspection of the conveying pipeline to determine the specific location and cause of blockage. During inspection, tools such as pressure gauges and air sweep lines can be used to assist in positioning.

2、 Clearing blockages

• Blow air to clear the blockageFor the pressure conveying device, the blowing port pipeline with a shut-off valve can be opened, and compressed air can be blown in sequence to blow through the blocked layer section by section. For negative pressure pneumatic conveying, an adjustable aperture plug can be opened at the easily clogged area to allow air to enter and blow through the blockage.

• physical dredgingIf the blowing effect is not good, special dredging tools or equipment such as steel brush balls, dredging rods, etc. can be considered to physically dredge the blocked area.

  
  

3、 Adjust process parameters

• Optimize airflow velocityAdjust the airflow speed according to the characteristics of the material and the actual situation of the conveying pipeline to avoid blockage caused by too fast or too slow speed.

• Adjust the mixing ratioFor materials with poor liquidity, reduce the mixing ratio appropriately to reduce the risk of blockage.

4、 Check and improve the conveying system

• Check pipeline designEnsure reasonable pipeline design, avoid excessive bends and sudden changes in pipe diameter to reduce airflow resistance.

• Check the gas supply systemEnsure good mechanical performance of the gas source, sufficient gas volume, and stable pressure. At the same time, check whether the gas storage tank and gas water separator are working properly and promptly remove any moisture from them.

• Check the sending tankEnsure that the design of the sending tank is reasonable, the size of the discharge port is appropriate, the taper is sufficient, and the wall surface is smooth to reduce the possibility of blockage.

5、 Strengthen daily maintenance and upkeep

• regular cleanupRegularly clean the conveying pipelines, sending tanks, and other equipment to prevent material residue from causing blockages.

• Check the equipment statusRegularly inspect the equipment, pipelines, control components, etc. of the pneumatic conveying system, and promptly handle and repair any abnormal phenomena.

• Strengthen operational trainingTrain operators to improve their operational skills and ability to respond to unexpected situations.

6、 Other emergency measures

• backup planDevelop a backup transportation plan so that in the event of a malfunction or blockage in the main transportation system, it can quickly switch to the backup plan to ensure production is not affected.

• Contact a professional teamIf the blockage problem is difficult to solve, it is necessary to promptly contact a professional pneumatic conveying team or supplier for technical support and assistance.

In summary, emergency measures for the blockage of white carbon black pneumatic conveying pipes need to start from multiple aspects, such as shutdown inspection, clearing blockages, adjusting process parameters, inspecting and improving the conveying system, strengthening daily maintenance and upkeep, and developing backup plans, to ensure the smooth operation of the conveying system.